x5045程序.docVIP

//X5045.H #ifndef X5045_h #define X5045_h #define WDT1_4 0x00; #define WDT600 0x10; #define WDT200 0x20; #define WDTDIS 0x30; //BIT sbit B_CS5045=P2^0; sbit B_SO5045=P2^1; sbit B_SCLK5045=P2^3; sbit B_SI5045=P2^2; extern unsigned char data tcX5045; void RstWDT(void); void WrB5045(unsigned char,unsigned char) reentrant; //写入单字节数据 unsigned char RdB5045(unsigned char); //读出单字节数据 void byteout(unsigned char); //向5045输出单字节 void wip_chk(void); //等待5045结束内部写周期 unsigned char rdsr(void); //5045状态寄存器读出程序 unsigned char bytein(void); //从5045读出一字节数据 unsigned char readx(void); //读地址,地址位于100h void wrsr(unsigned char); //5045状态寄存器写入程序 void wren(void); //写允许 void wrdi(void); //写禁止 #endif /* X5045/3 读写驱动 */ #include #include X5045.h //复位看门狗 void RstWDT() { B_CS5045=0; B_CS5045=1; } //向X5045写入单字节数据 //输入：x,待写数据,address,写入数据的地址 void WrB5045(unsigned char x,unsigned char address) reentrant //数据,地址 { wren(); B_SCLK5045=0; B_CS5045=0; byteout(0x2); //write byteout(address); byteout(x); B_SCLK5045=0; B_CS5045=1; wip_chk(); wrdi(); } //从X5045读入单字节数据 //输入：address,待读数据地址 //返回：读出的数据 unsigned char RdB5045(unsigned char address) { unsigned char data x; B_SCLK5045=0; B_CS5045=0; byteout(0x3); //read 000h byteout(address); x=bytein(); B_SCLK5045=0; B_CS5045=1; return (x); } //向X5045输出单字节 void byteout(unsigned char x) { unsigned char data i,j; j=128; for(i=0;i8;i++) { B_SCLK5045=0; B_SI5045=x/j; B_SCLK5045=1; x%=j; j/=2; } B_SI5045=0; } //等待X5045结束内部写周期 void wip_chk() { unsigned char data dat; tcX5045=0; do { dat=rdsr(); dat=0x1; i