MCS脚踏板.pdfVIP

Electronic Floor Mounted Page 1 of 5 Throttle Pedal 962 000 series Electronic Floor Mounted Throttle Pedal 962 000 series  MCS – July 2008 Electronic Floor Mounted Page 2 of 5 Throttle Pedal 962 000 series 1. Mechanical Specifications: • Two “built-in” return springs • Additional return spring built in the sensor • Die cast aluminium treadle and mounting plate • Complies with FMVSS 124 • certified Travel angle 22° Angle option 30°, 35°, 45° Protection classification IP66 Storage temperature -40°C to +85°C Operating temperature -40°C to +85°C Connector AMP - 6 pins - waterproof (IP69) • Options: − Kick down virtual feedback and kick down signal − Twin sensors − Connector kit or customized wire harness • Technical specification sheet and part numbers are available upon request 2. Electrical Specifications: All Electronic Throttle Controls are fitted with programmable Hall Effect Sensors. The signals generated by the Electronic Throttle Controls will allow a smooth and precise engine speed control. The output values are programmable and hence can be adapted to the customer’s specifications. Electronic Throttle Controls can be connected directly to the engine management system, or engine Electronic Control Module Available programmable sensor models: − Single analogue sensor with electronic Idle Validation Switch (IV