BreakingPoint Systems (BPS测试仪学习).pptVIP

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * L4 Recreate Known protocols can be decoded : L4 Recreate Exercise Import a TCP and a UDP capture files and create the following test : Capture file settings L4 Recreate User settings (Recreate) L4 Recreate Create a new test and select a Neighborhood : L4 Recreate Select the Recreate Component : L4 Recreate Click “Import” link in the Capture file pane of the Parameters Tab: L4 Recreate You can choose a capture file on your local computer, this file must contains at least one valid TCP or UDP session: L4 Recreate You can shape and increase recreated traffic with “Use User-specified settings”. This options enable component configuration like other components (Load profile, Data rate, Max sessions, sessions/s) L4 Recreate We configure a 1 step (calculated) Rampup for a 30 seconds steady phase L4 Recreate The Session options group lets you configure the maximum simultaneous sessions and maximum sessions rate L4 Recreate Example of 30 seconds 10x stair steps to reach the maximum session rate L4 Recreate Example of 30 seconds 10x stair steps to reach the maximum session rate L4 Recreate Report shows the session rate L4 Recreate Exercise Import a TCP and a UDP capture files and create the following test : User-specified settings Join the community ! * /community Thank You * * * * * * * * * * * * * * * * * Security Test Step 1 : Choose Device under test monitoring scripts. In this example we will choose “SSH_FW1” Security Test Step 2 : Choose a test component that will define the type of traffic you will be able to run In this example we will choose the Security component Security Test For now, save the test for future use Security Test Go to the Strike list in “Managers” too