立式气液分离器.docVIP

作品分组课题名称 学校名称 专业名称 成员姓名 指导教师 递交日期： 年 月  The design of vertical heavy energy liquid separator Abstract The vertical type gas-liquid separator is a universal equipment that separate gas and liquid. It is also the key equipment for energy saving and environment protection. It is widely used in the chemical, metallurgical, oil refining, power, food, light industry, pharmacy, machinery and many other industrial departments. Therefore, whether from the above all kinds of industrial development or from efficient energy use.selecting separator, reasonable design, manufacturing and operation has the extremely vital significance. According to the conwentional design method of the vertical gas-liquid separator.Mainly according to the HG/T 20570.8-95，gas-liquid separator design standards, through the process calculation, the structure design, strength check to carry on the design. The main conclusions are as follows: The material of the cylinder body selects Q235-C, the cylinder diameter is 500 mm, the thickness is 6 mm and the height is 1500mm. The head material selects Q235-C, selection of standard elliptical head, the inner diameter is 500mm,the thickness is 6mm, the height is 150mm and the straight edge height is 25mm. The flange material selects 20# steel and the type selects the welding neck flange. The bearing material selects Q235-B and the type selects leg bearing B series. The cylinder pressure test pressure is 2.1875 MPa and the hydrostatic test qualified. After checking the flange and the supporting leg meets the requirements. Key words: the vertical type gas-liquid separator;structure design;strength check 目 录 立式气液分离器设计 I 摘 要 I Abstract II 第一章 绪 论 1 1.1立式气液分离器概述 1 1.1.1立式气液分离器的分类及特点 1 1.1.2立式气液分离器的研究进展 2 1.2本课题研究内容及目的 2 1.3经济技术性分析 3 第二章 工艺设计 4 2.1工艺设计参数 4 2.2设计方案确定 4 2.3工艺尺寸计算 4 2.3.1气体流速计算 4 2.