外文中英文翻译基于LabVIEW的虚拟示波器研究和开发.docx

中文5650字附 录Research Development of Virtual OscillographBased on LabVIEWAbstract: This paper introduces the design process of a virtual oscillograph based on LabVIEW. Mainly analyzes the amplitude value and time base adjusting methods during the real-time display. At the same time, it simply introduces the basic thought when measuring the period and frequency of the waveform gate voltage method and its application. At the end of this paper, combining the parameter measurement and waveform display of the virtual oscillograph with the modern motor close-loop lock-phase speed control, it analyzes the parameter measurements effect in PID control.Keywords: Virtual Oscillograph; Time-Base; Motion ControlⅠ. INTRODUCTIONIn the rapidly developing industry control field, measuring technologies and apparatus become more and more important. But because of the disadvantages of the traditional instruments such as high price, single function, bad expansibility, etc., they can hardly meet the industry requirement. With the development of computer technologies and virtual instruments (VI for short), the scope designed by users becomes widely. There are many different functions with the same hardware which can make two or more machines work synchronously with the advanced bus technologies such as PXI bus technology [1].Virtual instruments become more and more popular for its upstanding characteristics like low cost, multi-function, facility and so on. All measuring instruments consist of three parts: data acquisition, data analysis and results output [2]. In these three parts, data acquisition can be done by the system hardware like A/D module or digital I/O modules. Data analysis and results output can be completed by software system based on computer. So, if given some necessary data acquisition hardware, a measuring instrument based on computer can be constituted. The software technology is the essential one in the virtual instrument. [3] Visual C++, LabVIEW, LabWindows/CVI, VEE et