北京地区盾构机刀具失效分析及再制造研讨.pdfVIP

制造与再制造中的堆焊技术论文集 北京地区盾构机刀具失效分析及再制造研究 蒋建敏1，赵学彬1，贺定勇‘，韩文政2，邹积波3 (1．北永I：业夫学材料科学与一I：程学院北_：Ijc 程公司北京100029) 摘 要：根据北京地区地层中含有大量砂卵石的特点，对盾构机刀具进行了失效分析，发现其失效原因主要是冲击和 高应力磨粒磨损。针对盾构机刀具的再制造，开发了--4巾堆焊药芯焊丝DG7。再制造刀具的刃口堆焊层无裂纹，硬度 为50～55HRC，冲击后硬度为55～60HRC。啊制造刀具的寿命商于进口刀具。 关键词：盾构机刀具；失效分析；药芯焊丝；堆焊 中图分类号：3G47，TlPll7 文献标识码：A Failure and ofShieldMachine’sCutterin AnalysisReproducing BeijiugRegion JIANG IAN Jian．min’，Zl_IAOXue．bin’，I{E Ding．yong’，IWen-zhcn92，烈川Ji-h03 of The ol’ArmouredForce 100072；3 (I．BeijingUniversityTechnology,Beijing100022；2Academy Engineering，Beijing ConstructionShield Basic BeijingCity EngineeringCorporation，Beijing100029) shieldmethodisan tosolvethe trafficcrowdedat way present．Thispaper Abstract：Constructingsubwayby important cit{’S theshield thilure on in whichisliali andscrcc．f【isIbundthatthe machinecutter’S lhe analyses basing geologyBeijing ol’grit namedDG7is shieldmachinecutter’Sfailur,：iscaused and flux—coredwire hardfilcing byhighstress，impactgrain-abrasion．A is i,1the metalOn cutter’S to and thecutter．。Iherenocrack the cuttingedge developedrepairreproduce deposited reproducing 7Ihe metal’Shardnessis50～55ItRCandit canreach55～60I{RCalter cutter’S deposited beingimpacted．‘lhcreproducing SCl’vicelifcis thanthatol’th