基于MCGS的烟气冷却控制系统设计_.docVIP

本科生毕业设计说明书（毕业论文） 题 目：基于MCGS的烟气冷却 控制系统设计 学生姓名：学 号：专 业： 班 级：指导教师： 基于MCGS的烟气冷却控制系统设计 摘 要铜作为工农业、军事等各行业的重要材料，在很久以前就已经被人们发现并利用了。随着科学技术的快速发展，铜产品的用途越来越广泛，同时各行业对其质量的要求也越来越高，因此铜冶炼工业也随之有了迅速的发展。但是，由铜冶炼工业发展所带来的负面影响也不容忽视。 在铜冶炼过程中生成的含大量SO2的烟气如果直接排放到大气，一方面会对自然环境造成污染，另一方面SO2是制酸的原料，这样也造成了资源的浪费，因此无论从环保还是经济的角度来讲，对这部分含SO2的烟气进行回收利用都十分重要。但在回收之前必须对其进行冷却降温、静电除尘等处理，使之符合制酸的各项技术指标。 本设计即为对铜冶炼生产过程中生成的烟气进行冷却降温的处理——冷却塔烟气温度自动控制，使其满足后续制酸的温度要求。 在该冷却塔烟气温度自动控制系统中，采用智能仪表、PLC等对冷却塔烟气温度进行自动控制，同时通过MCGS组态软件完成了实时数据的采集，实时曲线、历史曲线、历史报表等的输出，实现了对整个控制过程的监控，严格的把冷却塔烟气出口温度控制在要求范围内。关键词：铜冶炼；烟气；温度控制；可编程控制器；MCGS组态The control system design of flue gas cooling based on MCGS Abstract Copper as a basic material in industry and agriculture, military, and other important sectors , has already been used in a long time ago.With the rapid development of science and technology, the more widely used of copper products, the more strictly required on its quality in all sectors, and copper smelting industry has followed a rapid development. However, the smelting of copper from industrial development brought about by the negative impact should not be overlooked. The negative impact should not be overlooked which the smelting of copper industrial development brought The flue gas that mixing a large number of SO2 which produced by copper smelting process directly vented into the atmosphere, on the one hand, the natural environment will be polluted, on the other hand SO2 is the raw material of acid making. It caused a waste of resources, both from the environmental and economic point, The recycling of SO2 gas is very important. However, The flue gas must be cooling and electrostatic dust before recoverying it。Bringing them in line with technical indicators of acid. This design is about flue gas is cooling which produced by copper smelting process – temperature control of flue-gas temperature in cooling tower, meeting the temperature requirements of acid making . The flue gas temperature control system in the cooling tower