1580热轧运输链压卷辊液压系统设计.docVIP

热轧运输链压卷辊液压系统设计 摘 要 热轧钢板是钢铁产品的主要品种之一，广泛应用于工业，农业，交通运输和建筑业。运输链的用途是在轧钢车间实现带卷运输、翻卷、回转及称量、试样采集等动作，起辅助工作的运输设备，是轧钢生产中采用的主要运输方式。此次设计的是热轧运输链压卷辊液压系统设计液压系统。压卷辊通过液压缸和液压马达将带钢对中咬入，以实现剪切等工序，为了顺利平稳的实现上述动作，通常使用液压传动系统和电液比例控制。本系统主要有两个支路组成：压卷辊的升降动作；压卷辊的回转运动。在设计过程中，对各支路的受力进行详细的计算，对各元件的选用进行详细的说明，对液压执行元件、液压阀、液压辅助元件和泵站进行详细的设计。 关键词：液压系统；运输链；液压阀；泵站 Volume transport chain of hot-rolled high hydraulic pressure system design Abstract Hot-rolled plate steel products is one of the main varieties，Widely used in industry, agriculture, transportation and construction.The use of the transport chain in the steel rolling plant to achieve with volume transport, turnover, Rotary and weighing, the specimen collection, such as action, play a supporting the work of transportation equipment, steel rolling production is the main mode of transport.The design is hot-rolled roll roller pressure hydraulic system Hydraulic System Design. Volume pressure roller through the hydraulic cylinder and hydraulic motor will bite on the strip in order to achieve the shear processes, in order to achieve a smooth and stable of the above-mentioned actions, often using the hydraulic drive system and electro-hydraulic proportional control.The system has two main slip road: Volume pressure roller action of the take-off and landing; pressure roller rotating Vol. In the design process, the slip road on the edge of a detailed calculation, the various components of the selection of a detailed description of the hydraulic components and hydraulic valves, hydraulic components and auxiliary pumping stations to conduct detailed design. Key words: Hydraulic system；Transport chain；Hydraulic valve；Umping station 目 录 1 绪论 1 1.1 课题的背景及意义 1 1.2 国内外运输链设备的发展状况 2 1.3 热轧运输链压卷辊液压控制系统简介 2 1.4 本课题的主要设计内容 3 2 热轧运输链压卷辊传动控制系统设计 5 2.1 设计主要参数要求 5 2.2 制定系统方案 5 2.2.1 液压系统的组成及设计要求 5 2.2.2 控制系统要求 2.2.3 其它要求 6 3 压卷辊液压系统的组成及工作原理 7 3.1 压卷辊升降液压缸载荷的计算 7 3.1.1 拟定系统方案 7 3.1.2 拟定液压系统原理图 8 3.2 确定液压动力元件参数及系统元件 9 3.2.1 压卷辊升降液压缸载荷的计算 9 3.2.2 压卷辊旋转马