afp-400章节.pptVIP

Thank you! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * AFP-400 Fire Alarm Control Panel Key AFP-400 Features 2 intelligent addressable loops 396 intelligent points 198 detectors (Ion, Photo, Thermal, Duct) 198 modules (Pull, Call Point, Relay, or Signal) 64 panel output circuits Built-in circuits 4 built-in signal circuits, 4 relays Optional voice and telephone Color graphics option (VGAS) Siemens SAB167 CPU-400 Microprocessor State-of-the-art RISC microprocessor Extremely fast (less than 3 second response!) 16-bit watchdog timer Speed comparable to a 386 class PC computer The CPU-400 Module Printer Port Switches QWERTY Keypad Fold Down Door 80 Character Display SLC Loop 1 SLC Loop 2 EPROM Slide-In Labels Status LEDs CRT Port EIA-485 “Terminal” EIA-485 ACS CPU-400 Features 80-character, backlit Full QWERTY-type keypad Status LEDs AC Power, Fire Alarm, Pre-Alarm, Security, Supervisory, Trouble, Disabled Points, Alarm Silenced Switches Acknowledge, Silence, Drill, Reset, Lamp Test Slide-in LED and switches labels CPU-400 Standard Circuits EIA-232 printer port EIA-232 CRT port EIA-485 “Terminal Mode” port EIA-485 “ACS Mode” Port Two SLC loops (Style 4, 6 or 7) Built-in isolators Built-in noise control circuit Up to 10,000 ft. SLC loops Up to 1,000 ft. untwisted/unshielded MPS-400 Power Supply Full 6.0 amps of power (total) Two non-resettable 24 VDC @ 1.25 amps One resettable 24 VDC @ 1.25 amps Four notification circuits 24 VDC @ 2.5 amps Field selectable 120 or 240 VAC 12 to 60 A.H. batteries (lead acid only) 4 notification circuits (Class A or B) Four Form-C relays Alarm, Trouble, Supervisory, Security Option - Convert supervisory and security to alarm The MPS-400 120 or 240 VAC 12 to 55 A.H. 2 Non-Reset @ 1.25 amps each Reset @ 1.25 a Form-C Contacts NAC or Release 1 2 Circuits @ 2.5 amps (Class A or B) NAC 3 4 (same as above) Status LEDs Transmitter Module Plug Panel Option Modules Up to 8 modules Each with an expander Supports: ICM and ICE m