计及主变过载和联络容量约束的配电系统供电能力计算方法精选.pdfVIP

第 31 卷 第 25 期 中 国 电 机 工 程 学 报 Vol.31 No.25 Sep.5, 2011 2011 年 9 月 5 日 Proceedings of the CSEE ©2011 Chin.Soc.for Elec.Eng. 97 0258-8013 (2011) 25-0097-07 TM 74 A 470 40 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 计及主变过载和联络容量约束的 配电系统供电能力计算方法 葛少云，韩俊，刘洪，郭寅昌，王成山 (智能电网教育部重点实验室(天津大学)，天津市 南开区 300072) Power Supply Capability Determination Considering Constraints of Transformer Overloading and Tie-line Capacity GE Shaoyun, HAN Jun, LIU Hong, GUO Yinchang, WANG Chengshan (Key Laboratory of Smart Grid (Tianjin University), Ministry of Education, Nankai District, Tianjin 300072, China) ABSTRACT: The traditional way of calculating power supply 关键词：配电系统；供电能力；短时过载；联络容量 capability of distribution system, based on the interconnection 0 引言 is formed by main transformer and the N−1 guideline, is defective without considering tie-line capacity and the main 配电系统作为联系终端用户与发、输电系统的 transformer’s short-term overload. In this paper, an improved 纽带，是保证用户安全可靠供电的重要环节。配电 method was proposed to solve this problem. Firstly, the tie-line 系统不仅要考察诸如可靠性、电压质量、线损率等 constraint matrix was established to accommodate the large 传统指标，还要针对配电系统究竟能够供应多少负 differences of tie-line capacities among transformer substations; then, a virtual contact matrix was defined to describe the load’s 荷、配电系统的设备最大利用水平如何等情况进行 second transfer process caused by the main transformer’s 研究和统计。而后者恰恰是当前配电系统规划与评 short-term overload, and on which basis formed the load 估工作的薄弱点——仅仅考察线路联络率、设备重 synthetic transfer matrix. These two modification