Part 9 - Extreme Wind SACST 培训教材.pdf

Part 9 -Extreme Wind Preparation 1) Under “Training Project”, create “Extreme Wind” subdirectory 2) Under “Extreme Wind”, Create “Static SE”, “Modes” and “Dynamic Wind” subdirectories. 3) Copy SACINP.STA model file, SEAINP.STA and PSIINP.DAT soil data from “\Spectral Earthquake\Static SE” directory to “Static SE” directory. Creating foundation superelement under “Static SE” directory, 1) Modifying Seastate file SEAINP.STA Rename load case EQKS to DWND in load combination and load case selection line. Modifying X and Y accelerations in GRVX and GRVY from 0.08 G to 0.02 G. Portion of modified Seastate input shall looks like following, LDOPT NF+Z 1.025 7.85 -79.50 79.50 MN NPNP K LCSEL DWND SUPX SUPY … LOAD LOADCNDEAD INCWGT ANODWKWY DEAD DEAD -Z M LOADCNMASS INCWGT MASS ACCEL 1.0 N CEN1 LOADCNGRVX INCWGT MASSANODWKWY INCWGT MASS ACCEL 0.02 CEN1 LOADCNGRVY INCWGT MASSANODWKWY INCWGT MASS ACCEL 0.02 CEN1 LCOMB LCOMB DWND DEAD 1.0MASS 1.0 LCOMB SUPX DEAD 1.0MASS 1.0GRVX 1.0 LCOMB SUPY DEAD 1.0MASS 1.0GRVY 1.0 END 2) Creating run file to solve the static load DWND and to generate foundation superelement using SUPX and SUPY. In “Analyis Options” “Foundation” part, select “Create foundati