Release Notes for Catalyst 2960X and CatalystXR Series英文资料.pdfVIP

Release Notes for Catalyst 2960-X and Catalyst-XR Series Switches, Cisco IOS Release 15.0(2)EX4 First Published: November 18, 2013 OL-30810-01 This release note describes the features and caveats for the Cisco IOS Release 15.0(2)EX4 software on the Catalyst 2960-X and the Catalyst 2960-XR family of switches. Note Prior release note information for the Catalyst 2960-X and the Catalyst 2960-XR switch products were separate, but starting with Cisco IOS Release 15.0(2)EX4 your release notes are combined. Verify that these release notes are correct for your switch: • If you are installing a new switch, see the Cisco IOS release label on the rear panel of the switch. • If your switch is on, use the show version privileged EXEC command. See the “Upgrading the Switch Software” section on page 6. • If you are upgrading to a new release, see the software upgrade filename for the software version. See the “Software Image” section on page 6. You can download the switch software from this site (registered C users with a login password): /download/navigator.html Contents • Introduction, page 2 • What’s New in Cisco IOS Release 15.0(2)EX3, page 2 • Supported Hardware, page 2 • Device Manager System Requirements, page 5 • Upgrading the Switch Software, page 6 Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Introduction