机械采煤机截割部设计及强度计算.docVIP

摘 要 关键词： Abstract The part of cutting department rocker-arm drive design is this graduation project most important work. I firstly determined the transmission programme, distribution transmission ratio of various parts of the rocker, initially set the teeth of gears, the design and calculation of gear and checking, the design of planetary bodies, the design calculation and verification of axis ,and preliminary selected bearings and key, then briefly analyze the function of spare parts as well as the role of the various components.In the end, according to analysising and calculation finish the proess of the part of cutting department rocker-arm drive design. It is as a key and a difficult point that the study is based on the thought of the parameters design and with the purpose of the professionalcomputer aided design system. In the design it developed a computer aided design system of the involute gear with parameters design , carrying capacity calculation , technical files creation and management supported by database ofACCESS. So it makes an important meaning for efficiency and reliability of the involute gear design. Key words: cutting unit;planetary bodies;within the spray system involute gear ;parameters design ;computer aided design 目 录 摘 要 I Abstract II 第一章 绪 论 1 1.1采煤机的概述 1 1.2 采煤机齿轮传动的计算机辅助设计 1 第二章 采煤机截割部设计及强度计算 3 2.1 采煤机截割部传动系统方案的选择 3 2.1.1 摇臂传动方案的选择 3 2.1.2 截割部电动机的选择 3 2.1.3 分配传动比 3 2.1.4 初选各个齿轮齿数 3 2.2 传动轴功率、扭矩的计算 4 2.2.1 计算各轴的转速 4 2.2.3 各轴转矩的计算 5 2.3 齿轮的设计和计算 6 2.3.1 设计齿轮1、2 6 2.3.2 选择齿轮材料及确定其许用应力 6 2.3.3 按齿轮弯曲疲劳强度设计 6 2.3.4 确定许用弯曲应力σFP 6 2.3.5 选取载荷系数K 7 2.3.6 初步选定齿轮参数 7 2.3.7 确定复合齿形系数YFS 7 2.3.8 计算几何尺寸 8 2.3.9 按接触疲劳强度进行校核 8 2.3.10 设计齿轮5、6、7 8 2.3.11 选择齿轮材料及确定其许用应力 9 2.3.12 确定许用弯曲应力σFP 9 2.3.13 转矩 9 2.3.14 选取载荷系数K 9 2.3.15 初步确定齿轮参数 10 2.3.16 确定复合齿形系数YFS 10 2.3.17 计算几何尺寸 10 2.3.18 按接触疲劳强度校核 10 2.4行星齿轮的设计 11 2.4.1行星齿轮Ⅰ的设计 11 2.4.2 行星齿轮Ⅱ的设计 15 2.5 采煤机摇臂内各轴的设计 19 2.5.1 Ⅰ轴的设计 19 2.5.2 行星轴的设计 26 第三章 齿轮传动的计算机辅助设计计算 29 3.1 设计系统的设计过程及主要内容 29 3.1.1 建立数学模型 29