污水厂毕业设计---- 污水处理厂尾水脱氮工艺的设计.doc

题 目 污水处理厂尾水脱氮工艺的设计 学 生 学 院 专 业 班 级 校内指导教师 专业技术职务 校外指导老师 专业技术职务 二○。Sewage Treatment Plant Design Water Removal Process Abstract：The graduation project is designed according to the subject of the end of the water removal sewage。According to the quantity of sewage water treatment plant and sewage treatment plants and water quality characteristics and the end of the light through the appropriate design standard for sewage treatment plant。Finally adopted MBR back end with the treatment process for water treatment. Contents include: the design of specific contents (equipment selection and calculation), design problems, specific solutions for the problem, program development and design of the project budget. The successful completion of the final will be designed. The design of the MBR means the membrane bioreactor. MBR is the activated sludge and ultrafiltration combined with treatment, first by activated sludge for removal of biodegradable organic pollutants, and then will be purified using membrane activated sludge of water and solid-liquid separation. MBR mainly by taking into account the growing tensions of contemporary urban land more suitable for urban sewage treatment plant wastewater reuse, The existing sewage treatment plant sewage treatment based on the depth of processing, MBR reactor can achieve an area of less use of simple technology, easy operation and management, investment and operating cost is low, Status of urban sewage treatment plants to meet the conditions. Keywords：MBR; advanced treatment; water reuse摘要...............................................................Ⅰ 目次．．．．．．．．．．．．．．．．．.．......．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． Ⅲ 1绪论..... 1 1.1 课题研究的意义 1 1.2 国内外研究现状 2 1.3发展趋势 4 2 工艺流程的设计 5 2.1 工艺的选择 5 2.2