丰田RAV4底盘 (Chassis)培训.pptVIP

Contents Click a Section Tab Clutch Self-adjusting Type Clutch Cover The self-adjusting type clutch cover is used to ensure a comfortable clutch feel Reference (Clutch) Purpose Reference (Clutch) Construction Reference (Clutch) Construction Reference (Clutch) Construction (Image) Comparison Reference (Clutch) Self-adjusting Operation Normal condition Reference (Clutch) Self-adjusting Operation After the wear, diaphragm spring becomes high Reference (Clutch) Self-adjusting Operation Release load is increased Reference (Clutch) Self-adjusting Operation When the clutch disc is worn, release load is increased Reference (Clutch) Self-adjusting Operation The force applied to sensor spring is increased Reference (Clutch) Self-adjusting Operation Sensor spring is deformed and then clearance appears Reference (Clutch) Self-adjusting Operation Coil spring rotates adjust ring (eliminating clearance) Reference (Clutch) Self-adjusting Operation Clutch disengage Reference (Clutch) Self-adjusting Operation Clutch engage (adjustment is finished) Reference (Clutch) Self-adjusting Operation After the adjustment Service Point (Clutch) Replacement Service Point (Clutch) Installation When you install the clutch cover, tighten the set bolts by 180° at every tightening (to install the clutch cover uniformly) E35#(F) Manual Transaxle Transaxle Control Cable (Select Cable) Select cable with cable length adjustment mechanism Service Point (E35#(F) Manual Transaxle) Transaxle Control Cable (Select Cable) Adjustment EA64F Manual Transaxle Overall 6-speed EA64F manual transaxle is newly developed for 2AD-FTV / FHV engines EA64F Manual Transaxle Compact Construction Twin output shafts (No. 1 / 2) are used The 4th 5th and 1st Rev. drive gears share EA64F Manual Transaxle Transaxle Gear 1st, 2nd, 3rd and 4th drive gears on output shaft No. 1 5th, 6th and reverse drive gears on output shaft No. 2 EA64F Manual Transaxle Transaxle Gear Transaxle power flow EA64F Manual Transaxle Transaxle Gear Tran