中置电机装配流程MidDriveMotorInstallationProcess-GoPedelec.PDFVIP

中置电机装配流程 Mid Drive Motor Installation Process 1 电机安装 第一步：电机中轴套依箭头方向推入自行车五通管，长度为 68mm 的五通管，则中轴套露 出长度为 11mm，如图 1. Step 1. Push Motor BB axle inside BB tube(68mm) as per arrow direction, the exposed axle length 第二步：安装加强板。如图 2 Step 2. Install Securing plate. Please refer to Pic2. 1、将加强板套在中轴五通上 1. Put securing plate onto BB axle. 2、两个铝垫圈放在加强板与中置电机之间 2. Put 2 washers between motor and securing plate. 3、用两个 M5 ×14 的内六角螺钉将加强板与中置电机锁紧 3. Fix securing plate and motor using 2 pcs of M5×14 screws. 第三步：将 M33.5