genesis2000培训资料3.pptVIP

Small Spoke Width Thermal pad with an insufficient spoke width may affect the electrical connection between the drill inside the thermal pad and the plane that surrounds it. Air Gap (Thermal) 报告孔与的thermal pad inner is small NFP Spacing Negative layer only.report clearance is too small NFP Spacing(pos) Positive layer only.report nfp spacing Plane Spacing (Plane Spacing) Positive will report diffent net copper spacing Negative will report 隔离线 width Segmentation Lines (Plane Spacing) Negative layer only.报告最小的隔离线宽度 Net Too Large Silk Screen Checks 1. SM Clearance - reports close distances between silk screen features and solder mask clearances. 2. SMD Clearance - reports close distances between silk screen features and SMD pads. 3. Pad Clearance - reports close distances between silk screen features and pads. Test List 4. Hole Clearance - reports close distances between silk screen features and drills. 5. Rout Clearance - reports close distances between silk screen features and rout features. 6. Lines Width - reports line width violations and length to width ratio violations. Test List Use Compensated Rout Yes - Measure the distance from the edge of the compensated feature. No - Measure the distance from the edge of the real rout feature. Skeleton - Measure the distance from the skeleton of the rout feature. Apply To (All / Selected) enables you to define if the action will work on all features in the layer, or only on selected features. SM Clearance Report silk and sm clearance spacing is too small * * Power/Ground Checks 电地层分析 界面 Drill – 报告PTH/NPTH/VIAS/到铜箔之间的距离以及他们的annular rings。 NFP Spaccing:是否报告NFP to NFP and NFP to planes间距。 NFP:non-functional pads Sliver:是否报告slivers(负的层和正的层都会报告) Rout:是否报告铣到铜箔之间的距离 Thermal:是否报告thermal的开口宽度和连通性降低的问题 Plane spacing 报告不同铜皮之间的距离。在负层一般为隔离线的宽度。 Use Compensated Rout Yes - Measure the distance from the edge of the compensated feature. No - Measure the distance from the edge of the real rout feature. Skeleton - Me