多路输出反激式开关电源及设计.docVIP

  • 97
  • 0
  • 约1.88万字
  • 约 39页
  • 2018-02-08 发布于浙江
  • 举报
多路输出反激式开关电源及设计

多路输出反激式开关电源设计 摘 要:以UC3844芯片为控制核心,设计并制作了多路输出反激式开关电源。UC3844的启动与驱动电路、电流检测和过流保护电路等。合理选择、设计和分配了开关电源各电路参数;设计出电路原理图,根据设计规范制作出 PCB,并组装出电源样机,最后对设计的样机进行测试验证。 开关电源样机输出电压稳定性较高,输出电压纹波较小,符合设计规范小于 80mV 的要求;样机整体测试结果表明,电源各项指标均符合要求,输出稳定,性能较好。 关键词 Design of Multi-output Flyback Switching Power Supply Abstract: It was designed and produced a set of multiple output fly-back switching power supply, using the chip UC3844 as the control core. The design of the system and specific module circuits was completed. The module circuits include EMI filter circuit, level protection and bridge rectifier circuit, snubber c

文档评论(0)

1亿VIP精品文档

相关文档