毕业及设计论文ZJ50型石油钻机用动力绞车传动系统及设计.doc

毕业设计论文 毕业设计题目：ZJ50型石油钻机用动力绞车传动系统设计 教 学 班: 学生姓名： 学 号： 指导教师： 完成日期： 摘 要 关键词：绞车传动系统，Pro/E，滚筒和滚筒轴，ANSYS，静态和模态分析 Abstract Oil drilling rig is a very important tool in exploration and development of oil and gas. Oil drilling rig generally consists of Rotating equipment, recycling equipment, lifting equipment, power equipment, transmission equipment, control systems and equipment, drilling rig substructure and auxiliary equipment. The winch is an important mechanism of drill speed changes in oil and maintains constant drilling pressure and is also a core component of a drilling rig, directly determining the drilling ability. Traditional mechanical draw works bulky, heavy, complicated construction, so it is difficult to satisfy the requirement of new drilling technology.ZJ50 winch is simple, compact structure, large power and high utilization rate, good speed performance, safe and reliable. Base on the study of the overall structure and working principle of ZJ50 winch, we make three-dimensional modeling of components of transmission system by Pro/E. And then check the safety of drum, drum shaft and other important components. Last, finite element analysis on the drum, drum shaft and drum shaft assembly by ANSYS. From the results of the verification ，we know that the design of ZJ50 winch is reasonable, and it can meet the normal requirements. The optimization of ZJ50 transmission system provides a theoretical reference for the winch development, and has certain engineering application value. Key Words: Winch transmission system, Pro/E, Roller and roller shaft, ANSYS, The static and modal analysis 目 录 摘要 Abstract 第一章绪论 1 1.1 石油钻机结构简介 1 1.2 绞车的结构简介 1 1.3绞车的功能及分类 2 1.4 本次毕业设计的研究背景与意义 3 1.5 石油钻机国内外的发展状况 3 1.5.1 石油钻机国内的发展状况 3 1.5.2 石油钻机国外的发展状况 4 1.6 本次毕业设计目的 5 1.7 本次毕业设计的任务及要求 6 第二章ZJ50 型绞车传动系统介绍 7 2.1 ZJ50 型绞车的主要技术标准及设计原则 7 2.1.1 绞车的使用工况及要求 7 2.1.2 主要技术标准及设计原则 7 2.2 ZJ50 型绞车结构及工作原理 8 2.2.1 绞车结构组成 8 2.2.2 绞车工作原理 8 第三章零件的三维造型 9 3.1 三维造型概念 9 3.2 Pro/E 概述 9 3.3 Pr