汽车车型进行自动识别系统及设计-专科毕业论文.doc

摘 要 目前由于交通建设的高速发展，公路，桥梁等收费有偿类交通设施的建设越来越多，相应对其交通控制管理及收费方式的要求也在不断提高目前车型的大小主要靠人工判断，还没有达到智能化。对汽车车型进行自动识别，为公路的智能化收费系统的实施解决了关键问所以本系统针对以上问题进行设计。 简要介绍了8位单片机AT89S52，并详细阐述了利用单片机实现车辆检测的设计方案。超声波传感器为检测元件；下位机与主PC机通信系统。AT89S52单片机作为整个下位机系统的核心，通过软件编程，来采集车辆信息从而达到的自动。本系统可分为硬件设计和软件设计两部分。对系统主要组成，设计方法选择做了详细阐述。硬件电路由单片机、显示电路、报警电路、检测电路、电源电路、栏杆控制电路组成。采用汇编语言编写。给出了程序的流程图、初始化程序、以及检测程序、控制程序。单片机AT89S52；超声波传感器RS232；车型检测 Abstract As the current rapid development of transportation construction, highways, bridges and other fees paid transport facilities such as the construction of more and more, corresponding to its traffic control management and pricing requirements are also rising. The current models rely mainly on the size of judgement, has not yet reached intelligent. If the Automatic Vehicle Identification, we can intelligent highway system in the implementation of the settlement of the key issues. Therefore, the system designed for the above-mentioned problems. System gave a briefing on 8-bit microcontrollers AT89S52, and elaborate on the use of MCU vehicle inspection system design. Focused on the practical applications of SCM in the merits. Introduced to ultrasonic sensors to detect components; under the crew and the main phase of PC communications systems. AT89S52 SCM as a whole under the crew the heart of the system, through software programming, to collect information vehicles to reach the semi-automatic charging the purpose. The system can be divided into the design of hardware and software design in two parts. System and the main component of the structure, design methods and equipment choices made elaborate. Hardware circuit by the microcontroller, display circuit, alarm circuits, detection circuit, the power circuit, railings control circuit. And gives a detailed flow chart of the design process, initialization procedures and testing procedures, control procedures. Assembly language software used to prepare. Key words: SCM AT89S52; ultrasonic sensors; RS232; model testing 目 录 第1章 绪