OCA_and_Lamination_介绍.pptVIP

Content * * OCA and Lamination 介紹 OCA characteristics 3M OCA產品分類(OCA/CEF) OCA Application LAM process OCA Characteristics Optically Clear Adhesives Free adhesive film with Light Transmissions 99% Haze from 0.1% - 0.8% Refractive Index of 1.47 (similar to Glass) Resistant to Temp/Humidity/UV conditioning Advantage 對比增強!! 3M OCA產品分類 Definition of OCA and CEF OCA (Optically Clear Adhesive) : Roll goods CEF (Contrast Enhancement Film): Diecut product made F-CTP F-CTP/RTP F-CTP G-CTP G-CTP (8187) (8267) (8261/8262/8264) (8171/8172) F-CTP (1507A) OCA Application Glass type Cover glass OCA Sensor glass Film type Cover lens OCA-1 ITO Film-1 OCA-2 PET Film OCA-3 ITO Film-2 Polarizer on cover glass Polarizer on sensor glass How to select OCA? (need to deeply discuss and study) Thickness Designed for C-POL structure Outgassing resistance for PMMA and PC Adhesion force (Peel strength) Softness (Hardness) Thermal stability (TGA) Other LAM Process Process flow STH (OCA+SG) A/C 30℃ 3kg 30min HTH (OCA+SG?CG) A/C 50℃ 3kg 30min C/G SG Kitting Inspection STH (Soft to Hard) process OCA to TP Note: 1. Machine spec. : L1540*W1400*H2422 [Roller type] 2. TP is loaded from the front side; OCA film loading and semi-finished product unloading is on the back side STH 壓頭治具 Parameter: 1. Roller speed 2. Roller pressure Note: 1. Material loading ,unloading and film peeling off is fully automatic 2. Laminate under the vacuum environment 3. Machine spec. : L3600*W1850*H2000 [Vacuum type] Cover glass to TP HTH (Hard to Hard) process / °C Kgf S Mpa mm/min Unit No. Item Low High A Descend Speed in vacuum (Before LAM) 10 50 B Vent in vacuum (After LAM) 0.3 0.5 C Holding time 0.5s 10s D Pressing pressure 80 400 E A/C Temp. 30°C 50°C? Block Material Rubber Quartz Key parameter: LAM前的下降速度(當真空壓力到達後) LAM後破真空的釋放壓力速度 LAM的壓著時間 LAM的壓著力量(要除以panel面積才是壓力) LAM壓頭材質 Press head Stage A B C E A/C (Autoclave) process Autoclave Parameter: 1. Temperature (30~50℃) 2.