POLAND 波兰.pptVIP

Modern Werehouse and Assembly Center 现代化厂房与装配中心 Unloading (manual or semimanual) 装卸（手动或半自动） Quantity and quality control 质量与数量控制 EAN, Serial Number reading系列数据读写 VAS VAS Preparing to storage (according to WMS – stock or picking area) 准备存储（根据WMS系统-安装或者分拣） Modern Werehouse and Assembly Center 现代化厂房与装配中心 Replenishment of picking area (by conveyor) 分拣区域的补给（传送机完成） Automatic Carton Erectors Machines 自动硬纸盒安装机器 Automatic labeling of cartons (barcodes to comunications between order/carton/conveyour) 自动贴标系统（通过传送机与指令机之间的条形码识别完成） Storage Area 存储区域 Rack system行李架系统 About 12 000 pallet places (euro) 12000个平装位置 4 level of storage 4个登记的储存空间 Tight corridors (1.86 m instead of 3.50 m) 紧密走廊（1.86m 替换3.50米） less of space (about 2 000 sqm) 节约空间（大约2000SQM） necessity of special forklifts 特殊的叉车配备 every place to pick process (to pick overdimensions goods and to pick directly to pallet outbound) 每个位置都可以分拣（分拣超尺寸的货物或者直接分拣平装的货物） Storage Area 存储区域 Picking Area 分拣区域 Devided for 4 zones (dimensions; way of picking, ABC class movement) 分为4个区域（尺寸，分拣方式，ABD分级） PALLET FLOW - for only big carton (original cartons leave the warehouse) ; about 300-500 cartons/hour; A,B,C movers 平装 -仅仅适用于大型的硬纸盒，大约300-500个毎小时，ABC机器 CARTON FLOW – for medium pieces which should be picked to another boxes, about 250-350 cartons/hour; B and C movers 硬纸盒层，中型货物，大约250-350每小时的生产量，B与C移动 SHELVES ZONE – only for C movers (very small quantity on stock) which should be picked to another carton; about 80-120 cartons/hour 储存架区域- 只针对C 移动设备（非常少量的货物，80-120 每小时生产量） LOCATIONS – about 3000 locations (SKU) and 10 000 carton places, RF systems, weight control 位置-大约3000个位置以及10000个硬纸盒位置，RF系统，重量控制 Picking Area 分拣区域 Picking Area 分拣区域– Carton Flow and Shelves 架子与承装 Gravity box places and shelves located on ground level of pallet flow 重型盒子以及架子位于平装地面上 Replanishment by conveyor or manual 传送机或者手动完成重新打压 Zone Picking to box according RF systems 立体箱体分拣根据RF系统 About 3 000 locations (SKU) and 10 000 carton places 3000个位置以及10000货物位置 Weigh