1500m3 乙烯球罐用锻件订货技术条件.doc

1500m3 乙烯球罐用锻件订货技术条件  1. 适用范围 Applied scope 本订货技术条件是以 SA-350 要求缺口韧性试验的管道构件用碳钢和低合金钢锻件为基础提出了对SA-350LF2 锻件的技术要求 This specification covered the technical requirements for forging of SA-350LF2 based on SA-350 Forgings, Carbon and Low-Alloy Steel, Requiring Notch Toughness Testing for Piping Components . 本订货技术要求仅适用于 XX石化项目中乙烯球形储罐用SA-350LF2 钢锻件的订货 This purchase specification is only used for Purchasing SA-350LF2 forgings of ethylene spherical tanks in Xx Petrochemical Project. 2. 引用标准 Applied codes and standards ASME 锅炉和压力容器规范第VIII 篇第二分篇及相关增补 —ASME Boiler and Pressure Vessel Codes, Section VIII, Division 2 and related Addenda ASME 锅炉和压力容器规范第II 篇A C 和D 部分 —ASME Boiler and Pressure Vessel Codes, Section II, Part A,C,D. ASME 锅炉和压力容器规范第V 篇及相关增补 —ASME Boiler and Pressure Vessel Codes, Section V and related Addenda ASME 材料说明书SA-370 钢制品力学性能试验方法和定义标准 —ASME Material Specification SA-370 Material Testing of Steel Products ASME 材料说明书SA-350 要求缺口韧性试验的管道构件用碳钢和低合金钢锻件 — ASME Material Specification SA-350 Forgings, Carbon and Low-Alloy Steel, Requiring Notch Toughness Testing for Piping Components ASME 材料说明书SA-388 大型钢锻件超声检验 —ASME Material Specification SA-388 Ultrasonic Examination of Heavy Steel Forgings ASME 材料说明书SA-275 钢锻件磁粉检验 —ASME Material Specification SA-275 Magnetic Particle Examination for Steel Forgings ASME 材料说明书SA-788 钢锻件通用要求 —ASME Material Specification SA-788 Steel Forgings, General Requirements ASTM E-709 磁粉检测的实施 —ASME E-709 Practice for Magnetic Particle Examination ASME E-10 金属材料的布氏硬度标准试验方法 —ASME E-10 Test for Brinell Hardness of Metallic Materials ASME E-140 金属标准硬度换算表 —ASME E-140 Standard Hardness Conversion Schedule for Metallic Material EN 10204 金属产品的检验文件 —EN 10204 Inspection Documents for Metal Products JB4730 压力容器无损检测 —JB4730 Pressure Vessel Non-destructive Examination JB4727-2000 低温压力容器用低合金钢锻件 —JB4727-2000 Low-Alloy Steel Forgings for Low Temperature Pressure Vessels 上述的规范 标准应是采购单生效日期时的最新版本如果涉及相关增补也应以采购单的生效日期为准 The codes and standards aforementioned shall be of the