三坐标测量机测头的误差校准.docx

附录2Study and Design no Automation Control System of the Thermal Power Unit from the System Point of view.Tian Jianyan liu sifeng Pan lizhen（1. NanjingUniversity of Aeronautics and Astronautics ,NanjingChina)（2. TaiyuanUniversity of Technology ,TaiyuanChina)Abstract: From the system point of view, the feature of the thermal power unit and the demand on its control system are analyzed and research in details in this paper. The character that the boils and the steam turbine are a whole of relative independence is fully considered. By coordinate control, the purpose of the optimal whole operating effect of the system is realize adopting the key techniques of communication, computer and intelligent information process etc.... The adaptation and whole property of the system is emerged by interaction and coordination between subsystems.1IntroductionThe system is an organic whole certain structure and function ,which consists of several element with interrelation , interdependence and interplay .The thermal power unit is a typical system ,composed of generator ,steam turbine ,boiler and many anxiliary equipment .Its main function is to produce the power load according to power network requirement .System engineering is the science used to study and design the complex system .In the meantime, It is also the theory and method used to deal with systems in term of definite aim in order to achieve the optimal whole of the system .From the system point of view, the coordinate control system of the thermal power unit has been studied and designed in this paper .2 Study and Design on Automation Control System of the Thermal Power unit from the System Point of View 2.1 Function of Automation Control System of the Power unit At first the thermal power unit as the controlled object is deeply studied before its automation control system is studied and designed .The thermal power unit is a huge group of equipments ,which is composed of generator, ,steam turbine ,boiler and many