关于大型绞车制动系统最佳设计方面的研究.docVIP

中文2100字 英文原文 Winch brake system on large-scale design of the best Red Phosphorus Technical Institute of the Chinese Red Phosphorus Muroran Institute of Technology Muroran Japan Hitachi Machinery Motorcycle laboratory Tsugaru Strait Japan Abstract In order to adapt like the tower molding machine, makes the winch as far as possible small and light is very important. Therefore, this article reported braking systems optimum design. Because of braking systems precise controllability and so on, the disposition braking systems can improve the systems operation the security. The author studied one kind to install on the 1000kw winch brake discs pliers disc brake, this kind of winch had the 10m/s fluctuation speed. Preface: In order to do as much as possible to winch the small and light is very important. In this area of a hoist are usually equipped with disc brakes. However, in order to achieve this objective by trying to improve the braking system, particularly the improved allocation of a brake winch safety of the operation. Winch is connected with a traditional brake disc brakes. Spring-friction with the pressure in the brake disc, and pressure on the size of the device installed in the braking pressure on the hydraulic cylinder control. If any oil hydraulic cylinder seals broken, the film will be exposed to the friction in the mist. This will result in a dangerous results - reduce the pressure on the brake. To avoid this potential danger, the author of the study indicative of a new type of brake, people from the maintainability of the view to study this new type of brake agencies. As brake institutions should also be very small, 20 MPA is considered the work pressure. In order to find the best system for us to study the characteristics of system dynamics. Braking System We take a typical winch (1000 kw) as a study example. There are two brake disc and four groups of institutions targeted in the brake disc. The maximum torque is when the emergencies occ