压捆机压缩成型装置设计.docVIP

压捆机压缩成型装置设计说明书 专业班级：机械设计制造及其自动化0504 学生姓名：刘万兵 指导教师：李耀明 教师职称：教授 摘要 我国秸秆、饲草等农业生物质资源丰富，但其收集、储运环节成为制约其产业化利用的主要因素。研究开发秸秆、饲草压捆设备是实现农业生物质产业化利用的前提之一。论文通过分析国内外秸秆、饲草压缩理论及压捆机的研究进展，根据我国现阶段存在着压缩理论研究不完善，压捆机设计依据较少等问题，进行了压捆机主要结构部件压缩活塞机构的设计、分析。 论文分析了秸秆、饲草物料的压缩理论，提出了在压捆机设计中满足结构需要的基础上主要设计指标方捆的截面尺寸为300mmX400mm，压缩机构需要对此截面草捆提供至少0.5MPa的压缩力，在设计中近似转换为曲柄连杆需要对活塞水平方向提供最大推力不小于60KN。通过借鉴国外压捆机经验，对压捆机的主要结构部件压缩活塞进行了设计。在己知活塞行程S=750mm、偏心距e=25mm、极位夹角=的条件下，计算并设定了适于方捆压捆机的压缩活塞结构参数，曲柄长r=375mm，连杆长L=820mm。并在pro/e里面进行了压缩机构的实体建模并对活塞体的干涉进行了分析。 关键词：秸秆、压捆机、压缩理论、压缩活塞、曲柄连杆、pro/e Baling presses Design Manual Compression Molding Abstract China straw, grass and other agricultural biomass is rich in resources, but the collection, storage and transportation links in the industrialization of restricting the use of its main factors. Research and development of straw and forage equipment, baling presses to achieve the industrialization of agriculture and the use of biomass, one of the premise. Papers at home and abroad by analyzing the straw and forage compression baling presses theory and research progress, in accordance with the present stage there is a theoretical study compression imperfect design of baling presses and so on the basis of fewer, baling presses to the main structural components of compression Piston body design, analysis. Paper analyzes the straw and forage material compression theory, put forward in the design of baling presses to meet the needs of the basis of the structure of the main design indicators tied to the cross-section size of 300mmX400mm, compression bundle institutions need to provide this cross-section of at least 0.5MPa compression force, similar in design is converted to the need for piston crank rod to provide maximum thrust level of the direction of not less than 60KN. From abroad through the experience of baling presses, baling presses to the main structural components of the compression piston design. Known in the piston stroke S = 750mm, eccentricity e =