建筑工程毕业设计六层办公综合楼框架结构设计.docVIP

毕 业 论 文 六层办公综合楼框架结构设计 毕业论文任务书 毕业设计（论文）任务书，内容如下： 1、毕业论文题目：六层办公综合楼框架结构设计 2、毕业论文目的、内容及要求： （1）屋面板及其次梁结构设计 （2）标准层次梁及楼板结构设计 （3）对⑨轴进行框架结构设计 3、主要参考文献： ［］［S］．：， ［］［S］．：，［］［S］．：，［］［S］．：，［］［S］．：，［］［S］．：，［］［S］．：，［］［S］．：，［］：，［］［S］．：，  中 文 摘 要 本工程位于江苏省某市，是办公、商场综合楼，为永久性建筑物，共六层，首层为商场，层高4.8m，其余各层为办公用房，标准层层高3.6m，室内外高差为0.45 m。该建筑位于市商业中心，处在主干道交叉口东北方。 主要分为五个阶段：天面及标准层平面结构布置、风荷载和水平地震作用、竖向荷载下框架的内力计算、框架内力组合和配筋、绘制施工图。 第一阶段是天面及标准层平面结构布置，构件编号，初选构件截面尺寸及材料强度等级。 第二阶段是风荷载和水平地震作用（包括纵荷载）下框架弹性位移验算；风荷载作用下框架的内力计算；多遇地震作用下框架的内力计算。 第三阶段是竖向荷载下框架的内力计算。 第四阶段是框架内力组合及配筋，天面及标准层梁板内力计算及配筋。 第五阶段是整理计算书、抄正、绘制施工图。 关键词: 设计 结构 框架 D值法 Abstract The design, which is a project, located the main road of Jiangsu Area, transportation convenience. On east side, there are a street and a market, the south is Luoyu Road, west and north side is developing ground, development the foreground is good. Comprise of three parts: The architectural design，structure design and shop schematic design. The first part of design is about architectural design. According to architectural design basis as well as architectural design basic principle, carries on the function district to the structure, further determines the project the plane, the vertical surface as well as the section plane. The second part of design is about structural design. Mainly is carries on the beam column section design. The concrete step is carries on a crosswise frame the structure computation and the design, namely in the definite computation diagram foundation, through obtains the beam column to the horizontal load and the vertical computation the most disadvantageous endogenic force combination, and take this as design basis determined the beam column the section size and required reinforcement in the area of cross section .Besides to beam column design, but also needs to design