水管接头90度水管接头注塑模模具设计.docVIP

编号： 实训(论文)说明书 题 目：90度水管接头注塑模模具设计 院 （系）： 机电工程学院 专 业： 机械设计制造及其自动化 学生姓名： 学 号： 指导教师： 2012 年 12 月 26日摘 要 本模具设计通过对塑件进行工艺的分析和比较,最终设计出一副注塑模。该课题从产品结构工艺性，模具结构出发，对模具的浇注系统、模具成型部分的结构、、冷却系统、注塑机的选择及有关参数的校核、都有详细的同时简单的加工工艺。通过整个设计过程表明该模具能够达到此塑件所要求的加工工艺。Abstract This course is designed Plastic 90-degree pipe fittings injection mold design. Through the process of plastic parts for analysis and comparison, the final design of an injection mold. The subject of the specific process from the product structure, die structure starting on the casting mold system, mold forming part of the structural design, ejection mechanism design, cooling systems, the choice of injection molding machines and related parameters of the check, there is a detailed description . While the simple parts of the structure molding process analysis, and preparation of process flow. Through the entire mold design process, indicating that the plastic mold to achieve the required processing. Simple form plastic parts, 90-degree pipe fittings, so this set of die design by spring, the slider side core pulling structure. In short, by the 90-degree pipe fittings injection mold design, the system described side core parting surface to determine the choice of direction and core pulling. Through this curriculum, raise self-cognitive ability of the mold, the mold design process have a deeper understanding of both the mold and die machining process adopted by some of the processing methods have a certain understanding. Key words: Plastic 90-degree pipe fittings; die; side core pulling structure;design 目 录 引言 1 1 塑件工艺分析 2 1.1 塑件的设计要求 2 1.2 塑件的造型尺寸 2 1.3 塑料制件工艺性分析及工艺选择 3 1.3.1塑料制件的结构工艺性 3 1.3.2成型材料ABS的特性 3 1.3.3ABS的注射成型过程及工艺参数 4 2 模具的结构形式和初选注射机 5 2.1 分型面位置的确定 5 2.1.1分型面的形式 5 2.1.2分型面的设计原则 5 2.2 型腔数量和排列方式确定 6 2.2.1型腔数量的确定 6 2.2.2型腔排列形式的确定 6 2.3 注射机型号的确定 6 2.3.1注射量的计算 6 2.3.2浇注系统凝料体积初步计算 7 2.3.3注射机的选择 7 2.3.4注射机的有关工艺