连接板冲压倒装复合模毕业设计说明书.docVIP

连接板冲压模具设计 摘要 冷冲压是在温下使板料经分离成形而得到制件的加工方法。而冲压产品质量的好坏主要取决于冲压模具。本次设计是对进行冲裁模的设计。首先对零件进行分析，了解零件结构，并利用所学的绘图软件AutCAD和Pro.E进行二维零件图和三维零件图的绘制，冲压课程知识最合适的加工方案，最终选择落料冲孔复合模的加工方案，进行模具的设计，并通过计算选择适的压力机。 关键词：冲压、落料冲孔、倒装复合模LOCKING LEVER RIDER,S COMPOUND BLANK AND PIERCE DIES DESIGN ABSTRACT Cold stamping is in room temperature makes the separation or sheet forming and get the processing method. Cold stamping process is a kind of high production efficiency, less scraps or no scraps of advanced processing methods in economic and technology has many advantages. Quality of products and stamping mould depends on cold stamping. The product can ensure stamping mould dimension accuracy, make the product quality is stable, but also in the process of product surface damage. This project is a blanking die design based on the original product.The design of the locking lever rider, components, and use of the structure of the drawing software AutCAD and Pro.E two-dimensional and three-dimensional drawing parts drawing, then through the course of stamping process analysis, knowledge parts design several sets of machining process and analysis, choose a suitable processing scheme, ultimately chose compound blank and pierce dies, the processing plan step after processing scheme, mold design, and choose the appropriate through calculation. KEY WORDS: tamping, composite modulus, compound blank and pierce dies, compound die is flip, process of analysis  目录 1 第1章 零件的工艺性分析 4 1.1 冲裁件的工艺性分析 4 1.1.1 冲裁件的工艺性 4 1.1.2 冲裁件结构的工艺要求 4 6 第3章 主要工艺参数计算 7 3.1 排样的设计与计算 7 3.1.1 排样的设计 7 3.1.2 合理搭边值及条料宽度的确定 7 3.1.3 计算送料步距和条料的宽度 8 3.1.4 材料的利用率（η） 8 3.2 冲压力的计算并初步选取压力机的吨位 9 3.2.1 冲裁力的计算 9 3.2.2 卸料力、推件力、顶件力和总冲压力的计算 10 3.2.3压力机公称压力的确定及初选压力机 11 3.3压力中心的确定 12 3.4 工作部分的尺寸计算 12 3.4.1 落料件尺寸计算 12 3.4.2 冲孔件尺寸计算 13 15 4.1 模具类型的选择 15 4.2 定位方式的选择 15 4.3 导向方式的选择 15 4.4 卸料方式的选择 15 16 5.1 工作零件的结构设计 16 5.1.1 凹模的设计 16 5.1.2 冲孔凸模的设计 17 5.1.3 凸凹模的结构设计 18 5.2 定位零件的设计 19 5.3导向装置的设计 20 5.4 卸料装置的设计 20 5.4.1 确定橡胶的自由高度H0 20 5.4.2 确定橡胶的横截面积A 21 5.4.