毕业设计弹性伸缩器底座零件加工模具设计营销研究.docxVIP

江汉大学毕业论文（设计）论文题目：弹性伸缩器底座零件加工模具设计（英文）：The elastic telescopic device base parts processing, mold design摘要本文主要分析了弹性伸缩器底座的成形工艺，介绍了冲孔—落料级进模和弯曲模的排样设计和工艺方案的选择，从而设计出合理的模具结构。经过对弹性伸缩器底座零件成形工艺分析、工艺参数的制定、参数及相关尺寸的计算，完成了模具结构设计及成型设备的选用。该设计模具工作性能良好，冲件的质量高，符合零件设计的要求。并用CAD和Proe绘制出了模具装配图和零件图的三维图和平面图。设计中首先要完成对零件进行工艺分析。拟定几种可能的工艺方案并作对比，选出最合适的工艺方案，完成板料的排样设计，并计算出总冲裁力和压力中心，并以此选出合适的压力机。最后对模具零部件进行详细设计，完成模具的装配和检测校核。通过以上流程使我对零件冲压工艺方案的制定、工艺计算及模具设计有更深层次的认识，综合素质能力得到很大提高。关键词：冲孔；落料；弯曲；级进模AbstractThis paper analyzes the elastic expansion joints base forming process, blanking, punching-level progressive die and flexural modulus nesting design and the choice of technology programs in order to design reasonable mold structure. After the elastic expansion joints base part forming process analysis, formulation of process parameters, parameters, and the calculation of the size, complete mold design and molding equipment used. The design of molds can be achieved automatically unloading and discharge performance, high quality of the punch member, in line with the design requirements of Part. Drawn with CAD and ProE 3D and plan view of the mold assembly drawing and parts diagram.The first to complete the design of parts for process analysis. Develop several possible process scheme and contrast, select the most appropriate process to complete the sheet metal nesting design, and calculate the total blanking force and center of pressure, and select the appropriate presses. Finally, the detailed design of the mold parts, complete mold assembly and testing of check. Through the above process my parts stamping process plan formulation process calculation and mold design have a deeper understanding of general ability has been greatly improved.Keywords: punching； blanking； bending； progressive die绪论1.1级进模简介级进模是一种高精度、长寿命的一种模具，是技术密集型模具的重要代表，这其中涉及了几乎与之相关所有的机械知识，是冲压模具的主要发展方向之一。这种冲压模具不仅能够进行零件的冲压，还可以根据零件结构的特点和材料成形性能，完成压筋、弯曲、拉深等成形工序。在冲压时，将带料或条料由冲模入口端送进后，在严格的控制步距精度条件下，按所设计的成形工艺来安排顺序，通过各工位的连续冲压，在最后一个工位经冲裁或切断后，便可冲制出符合要求的冲压件。为了