钢与钨钴硬质合金的钎焊组织与性能-天然气与石油.PDFVIP

上半月出版 Casting Forging Welding 金属铸锻焊技术 45 钢与钨钴硬质合 的钎焊组织与性能 李玉龙1 1 2 袁 禹业晓 袁 谢凤春 渊1.南昌大学 机电工程学院袁 江西 南昌 330031 曰2. 中国石油天然气管道局国际事业部袁 河北 廊坊 065000) 摘 要院为实现中碳钢和硬质合金的高效优质钎焊,以Cu-Zn 钎料对硬质合金和中碳钢进行了感应钎焊遥 结果表 明袁黄铜钎料可以使硬质合金和中碳钢形成良好的钎焊接头曰分析了钎焊接头界面组织袁接头区由 铜尧Fe-Cu-Zn 三元 反应层构成曰维氏硬度测试结果表明袁因感应加热淬火效应袁焊接后硬质合金显微硬度有显著增加曰对感应钎焊的打磨 头进行了电镀Cr 处理袁铬镀层提高了打磨头的耐蚀性和美观程度遥 关键词院硬质合金曰感应钎焊曰界面组织曰显微硬度曰电镀处理 中图分类号院TG454 文献标识码院A 文章编号院 Brazing Microstructures and Properties of 45 Steel and WC-Co Cemented Carbide 1 1 2 LI Yulong , YU Yexiao , XIE Fengchun (1. Nanc hang Unive rs ity Institute of Elec trical and Mec hanica l Engineering, Nanc hang 33003 1, China; 2. China Pe troleum Pipeline Bureau Inte rnational, Langfang 065000, China) Abstract 院In order to brazing the grinding head with high-quality and high-efficiency, induction brazing experiments of cemented carbide and the carbon steel were carried out using the Cu-Zn alloy. Results show that a good brazed j oint of the cemented carbide and carbon steel can be acquired using the Cu-Zn filler metal; the interface structures are analyzed; the brazed j oints are consisted of copper and Fe-Cu-Zn reaction layer. Vickers hardness test results show that after brazing, the hardness of cemented carbide has increased significantly because of the quenching effect of induction heating; the brazed grinding head is electroplated with chromium, the corrosion resistance