建筑节能工程技术管理、质量验收（Technical management and quality acceptance of building energy saving projects）.doc

建筑节能工程技术管理、质量验收（Technical management and quality acceptance of building energy saving projects） This article is contributed by zhw860202 Ppt documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Building energy conservation engineering management, quality acceptance and supervision Introduction to the standard standard for acceptance of construction quality acceptance of building energy conservation projects, code for acceptance of construction quality GB50411GB50411-2007 2011-3-24 One This paper introduces the code of acceptance for construction quality acceptance of building energy saving engineering, GB50411-2007. GB50411-2007 According to the construction quality acceptance unified according to the standard GB50300-2001 GB50300-2001 and the professional engineering standards and the professional code for acceptance of construction quality of Shanxi province with the local standard combined with the local standards of Shanxi province Shanxi province construction quality acceptance regulation DBJ04 engineering construction quality acceptance regulation DBJ04214-2003, 214-2003, Shanxi province construction the construction data management regulations, DBJ04-226-2004 DBJ04-226-2004 data management regulations, construction quality inspection procedures in the DBJ04 construction engineering quality inspection procedures in the DB2009 2011-3-24 2 General Objective: the acceptance of building energy saving project; Objective: acceptance of building energy-saving projects; application: new, suitable for 10 aspects: new construction, renovation and expansion of civil engineering; 10 aspects of building engineering; 10 aspects of design documents, design documents, the contract shall not be less than the provisions of this standard; in addition to provisions; this code, at the same time should carry out GB50300 and in addition to the standard, and should implement GB503