基于STC89C52单片机的路灯控制系统设计论文.docVIP

毕业设计 (论文) 作 者: 准考证号： 教学点: 专 业: 题 目: 基于STC89C52单片机的路灯控制系统设计 指导者： (姓 名) (专业技术职务) 评阅者： (姓 名) (专业技术职务) 2013 年 5 月 毕业设计说明书（论文）中文摘要  本系统采用模拟生活中道路两边路灯控制系统设计，通过利用STC89C52芯片和相关的光电检测设备，设计路灯控制系统，实现了能根据实际光线等外部环境因素，控制路灯开关的功能。 本系统设计可分为系统总体设计，系统硬件设计，系统软件设计和系统调试等。其中系统硬件设计包括单片机最小系统设计，LED数码管模块设计，时钟模块设计，信号采集模块设计，故障检测模块设计，报警模块设计，电源控制模块设计，通信模块设计和单元控制系统设计。软件设计主要采用系统结构模块化的方法，分别对几个主要模块的工作流程进行分析、设计，绘制系统整体流程图。 本系统实现了根据环境、交通因素的影响来控制路灯的开关，并对路灯的工作状况进行实时检测。系统具有可靠性高、成本低、实用性强的特色。 关键词 路灯 STC89C52 信号采集 控制系统  毕业设计说明书（论文）外文摘要 Title The design of road lamp control system based on MCU Abstract This system simulates the design of road lamp control system on both sides of street in life, which designs road lamp control system by using STC89C52 chip and the related photoelectric detection device,realizing the function of controlling the switch of the street lamp according to the actual light and other external environmental factors. The design of the system can be divided into the overall system design, hardware design, software design and system debugging. The hardware design includes the design of the minimum system of the one-chip computer, the module design of LED digital tube, the module design of clock , the module design of signal acquisition, the module design of fault detection, the module design of alarm, the module design of power supply control , the module design of communication and the design of unit control system. The design of the software mainly adopts the system structure modularized method,which analysis and designs several main module work process respectively, drawing the overall flow chart of the system. This system has realized the switch to control the lamp according to the influence of the factors of environment and traffic, and makes the real-time detection for the working conditions of the street lamps. The system has the