毕业设计论文某塑料制品厂全厂总配变电所及配电系统的设计.doc

摘 要 某塑料制品厂全厂总配变电所及配电系统设计 根据国家供电部门的相关规定，画出总配变电所及配电系统的主接线图。电气主接线对电气设备的选择，配电所的布置，运行的安全性、可靠性和灵活性，对电力工程建设和运行的经济节约等，都有很大的影响。,,, 关键词：变电所，负荷计算，设备选型，继电保护 ABSTRACT The whole plant distribution substation and power distribution system design of a plastic products factory is for power plant design. The design makes the narrative about the factory power supply, main equipment selection, protection device configuration and grounding system for lightning protection, which also includes the load calculation of the factory, the short circuit current calculation of the high pressure side and low pressure side, equipment selection and validation, the main equipment relay protection design, power distribution equipment design, lightning protection and grounding design. This design is based on the calculation of the active power, reactive power and apparent power transformer and the size of the corresponding main equipment main parameter, then works out the compensation computing power according to user requirements to voltage .Thus it can obtain the desirable size and number of compensation capacitor. According to the relevant provisions of the national electricity sector, the design draws the main connection diagram about the total distribution substation and power distribution system. Main electrical connection have great influence on the electrical equipment selection, the layout of the distribution, operation safety, reliability and flexibility, also power engineering construction and economy of the operation and so on. Keywords: substations, load calculation, equipment selection, relay protection 目 录 第1章 绪论 - 1 - 1.1 工厂供电的意义 - 1 - 1.2 工厂供电的要求 - 1 - 1.3 工厂平面图 - 1 - 第2章 主接线的设计 - 3 - 2.1 总配电所的主接线设计的原则和意义 - 3 - 2.2 变配电所主接线方案的技术经济指标 - 3 - 2.3 主接线图 - 4 - 第3章 负荷计算 - 6 - 3.1 负荷计算的意义 - 6 - 3.2 负荷计算的方法 - 6 - 3.3 负荷计算示意图 - 7 - 3.4 具体数据和负荷计算举例 - 7 - 3.4.1 原始数据 - 7 - 3.4.2 负荷计算 - 8 - 第4章 功率补偿计算及变压器的选择 - 12 - 4.1 功率补偿计算 - 12 - 4.2 变压器容量的选择 - 14 - 第5章 短路电流计算 - 16 - 5.1 短路电流计