WAM螺旋输送机.pdf

螺旋喂料机 安装，操作和维护 产品目录号 00515.M 产品目录号 编制日期 版式 发行 最近更新日期 建档日期 11.00 A6 100 11.02 57 版式 发行 最近更新日期 操作和维护 A) ADDRESS OF DEALER OR LOCAL SERVICE POINT A) 供应商或区域服务中心地址 B) IDENTIFICATION B) 识别号 Refer to other code and/or to the serial number in the 要识别此设备，请参阅订单确认书，发货单或者每台设备面板 acknowledgment of order in the invoice and on the packaging 上的序列号。 to identify the equipment. 1) Order code. 1） 订单代码 2) Serial number. 2 ） 序列号 EXAMPLE OF SERIAL NUMBER 序列号举例 C) CONTRAINDICATIONS TO USE B) 使用注意事项 lf the customer observes the normal caution (typical of this 如果用户发现普通告警（对于本类设备是正常现象）而且同时 kind of machines) together with the indications contained in 出现本手册包含的提示事项，此时设备工作正常。 this manual, work is safe. These machines are NOT suitable for handling of foodstuff. 本类设备不适于处理食物。 The machine must not be started before the machine itself, as 14/06/1982 (89/ 392/EEC). well as the plant it is going to be installed in, have been 在设备和要安装本设备的场所都声明符合 European Directive declared in conformity with the European Directive 14/06/1982(89/392/EEC)后，才允许使用本设备。 It is the plant designer’s / plant fitter’s responsibility to design 安装本设备的场所的设计者或施工者有责任设计并安装一切必 and install all necessary protection in order to avoid that 须的保护设施，避免设备和部件对人员和设备造成损害 （例如， breaking and/or yielding of the quipment or of parts of it