外文翻译----扩频通信系统及MATLAB仿真-其他专业.docVIP

Spread Spectrum Communication System and MATLAB Simulation Abstract This thesis expounds the basic principles of spread spectrum communication , and then the article mainly acts according to the Shannon theorem and tan oak Czechoslovakia you Nepal may the husband latent antijamming theory,With the aid of MatLab toolbox and Monte Carlo simulation algorithm,it has established the direct sequence spread spectrum communications system simulation model which does not have when the disturbance through the analysis error rate simulation curve and theory predicted value,had proven constructs the simulation model the accuracy. Key words：Spread spectrum；communication；MATLAB 1 Introduction 1.1 Spread Spectrum Communication System Spread spectrum communication, namely, spread spectrum communications (Spread Spectrum Communication), with fiber-optic communications, satellite communications, with access to the information age as the three major high-tech communications transmission.Spread spectrum communication is to send the information to be pseudo-random data is coded (spread spectrum sequence: Spread Sequence) modulation, spread spectrum and then the realization of transmission; the receiving end is using the same modem code and related processing, the restoration of the original data.Spread spectrum communication system has three main characteristics. Carrier is an unpredictable, or so-called pseudo-random broadband signal. Carrier data bandwidth than the modulation bandwidth is much wider. Receiving process is generated by local broadband carrier signal and receiving a copy of the signal to the broadband signal to achieve. The main way of spread spectrum are as follows:Direct Sequence Spread Spectrum (DSSS) using high-speed pseudo-random code on to the low-speed data transmission spread spectrum modulation;Frequency-hopping system using pseudo-random code to control the carrier frequency in a wider band of the change;TH is the data transmission time slot is a pseudo-random