教你配置EtherChannel.docxVIP

配置EtherChannel　 　Catalyst 2950 Switch 　Cat2950# 　Cat2950#conf t 　Enter configuration commands, one per line. End with CNTL/Z. 　　!-- The VLAN Trunk Protocol (VTP) mode is set to server, 　!-- and the VTP domain name to is set to cisco. 　Cat2950(config)#vtp mode server 　Setting device to VTP SERVER mode 　Cat2950(config)#vtp domain cisco 　Changing VTP domain name from VitalCom to cisco 　　!-- Created two VLANs: VLAN10 and VLAN20. 　Cat2950(config)#vlan 10 　Cat2950(config-vlan)#exit 　Cat2950(config)#vlan 20 　Cat2950(config-vlan)#exit 　　!-- Configured ports Fa0/5 through Fa0/14 in VLAN10, 　!-- and por