毕业设计（论文）-基于L6562的60W带PFC的LED灯驱动电源设计精选.docxVIP

毕 业 论 文论文题目基于L6562的单端反激式LED 灯驱动电源设计学院 专业 班级 学号 学生姓名 指导老师（签名）完成时间 年 4 月摘要根据LED灯高频开关电源的设计要求，本次设计了具有单端反激式结构的有源功率因数校正恒流限压反馈LED灯驱动电源电路。驱动电源的额定输出功率60W。驱动电源的校正控制芯片使用L6562，L6562工作在临界导通模式。单级反激式结构不仅实现了高功率因数的校正，同时还完成了DC/DC级的降压和高低压的隔离功能。驱动电源可以给LED灯提供恒定的电流，使LED灯能稳定的发光。鉴于单级PFC反激式开关电源的变压器不仅需要具备PFC初级电感的储能功能，同时还能实现反击式变压器的隔离降压功能。所以初级的电感结构进行了特殊设计。文中阐明了变压器的设计准则和计算。设计了能让单级PFC反激式开关电源正常工作，同时具有较高的传输效率的变压器。本次设计在反激式电路中使用的钳位方式是RCD钳位，RCD钳位电路能有效的降低电源的EMI。电路中使用到的开关器件是MOS管。本设计最终能实现功率因数0.9以上，输出功率达60W，同时效率达到85%的基本要求。关键词：反激式； 开关电源； L6562； 高功率因数； LED灯；Based on L6562 single-ended flyback type PFC LED drive power supply designAbstractAccording to the requirements of the LED lamp high frequency switching power supply design, the single-ended flyback type has been designed the structure of the active power factor correction constant flow pressure limiting feedback the LED drive power supply circuit.Driving power supply of rated power output of 60 w.Correction of drive power supply control chip using L6562, L6562 work in critical conduction mode.Single-stage flyback type structure not only has realized the high power factor correction, also completed the level DC/DC buck and high and low voltage isolation function.Driver can provide the LED constant current power supply, the LED lamp can steady glow. In view of the single-stage PFC flyback switch power supply transformer not only requires the PFC inductance energy storage function, but also can achieve the function of counter type transformer isolation step-down.So the inductance of the primary structure of the special design.This paper illustrates the design criteria and calculation of the transformer.Design can let the single-stage PFC flyback switch power supply to work properly, at the same time has high transmission efficiency of transformer. The design of the flyback type clamping way is used in the circuit RCD clamp, RCD clamp circuit can effectively reduce the power supply EMI.Circuit is used to switch devices in MOS tube.This design can eventual