毕业设计（论文）-宏昊塑料制品厂总配电所及高压配电系统设计精选.docxVIP

成人高等教育 毕业设计（论文） 题 目 宏昊塑料制品厂总配电所及高压配电系统设计学 院 自动化学院 专 业 电气工程及其自动化 年级班别 函授xxxx 级 学 号 xxxxxxxxxxxxxxxxx 学生姓名 xxxxxx 指导教师 xxxxx 201x年x 月宏昊塑料制品厂总配电所及高压配电系统设计 摘要设计任务来源于指导老师指定的设计题目，设计题目名称是宏昊塑料制品厂中配电所及高压配电系统设计。设计需做到方案合理、技术先进、运行可靠、满足相关规范的要求，还要简捷实用、便于操作、管理和维护，减少综合投资。此次设计的目的是根据本厂所取得的电源及本厂用电负荷的实际情况，并适当考虑工厂生产的发展，按照安全可靠、技术先进、经济合理的要求，确定变电所型式，合理进行该厂全厂总降压变电所及高压配电系统设计，确定该厂变电所变压器的台数与容量、类型选择变电所主接线方案、高低压设备和进出线，确定防雷接地装置等。工厂供电系统就是将电力系统的电能降压再分配电能到各个厂房或车间中去，它由工厂降压变电所，高压配电线路，车间变电所，低压配电线路及用电设备组成。其基本内容有以下几方面：进线电压的选择,变配电所位置的电气设计,短路电流的计算及继电保护,电气设备的选择,车间变电所位置和变压器数量、容量的选择,防雷接地装置设计等。关键词：总配电所，高压配电，塑料制品厂，短路计算，继电保护 The Design of High Voltage Power Substation and Power Distribution System of Hong Hao Plastic Products FactoryAuthor:xxxxxxTutor: xxxxAbstract The design task is originally specified by design instructor, name of which is the design of high voltage power substation and power distribution system of Hong Hao plastic products factory. The program is due to be reasonable, advanced in technology and reliable in operation, which not only meets the requirements of relevant norms, but also simple and practical, convenient to operate, manage and maintenance, and optimize the overall investment of the design. The design is made as per actual power supply of this factory and actual load of the factory, with considering the development of factory production, give a decision about the type of substation, which fulfils the requirements of advanced technology, safe and reliable, economic and reasonable. Design a reasonable factory step-down substation and its high voltage power distribution system, and determine the number, capacity, model of transformers in the factory substation, and choose a main wiring scheme for this substation, and also its high voltage and low voltage equipment and incoming and outgoing lines, determine the grounding device and etc.The factory power supply system is the power system of power step-down and distribution of electricity to each plant or workshop,