毕业设计（论文）-彭州市通济镇红山村集中供水工程设计精选.docxVIP

彭州市通济镇红山村集中供水工程设计四川大学 给水排水工程专业 2011届学生姓名：刘凤凯 指导老师：张永丽/彭遗柱中文摘要摘要为解决彭州市丘陵区农村存在的饮水不安全问题，在通济镇红山村设计一处集中供水工程。该工程设计规模为4000m3/d，设计解决23377人饮水问题。整个工程包括三大部分：取水工程、净水工程和输配水工程。取水工程主要是完成取水点的选择、取水方式的确定和取水泵站的设计，工程采用渗渠取水。输配水工程主要完成管网的定线和水力平差计算，保证各供水点水压满足要求。由于净水厂位于整个工程区的高处，故充分利用地形高差进行重力供水。净水工程的设计包括净水厂的位置选择、水处理工艺流程的确定、处理构筑物的设计计算以及水厂的平面和高程布置。通过技术经济比较，确定净水厂的工艺流程为：原水—→管道混合—→穿孔旋流絮凝池—→斜管沉淀池—→重力式无阀滤池—→ClO2消毒—→清水池—→管网。关键词 取水工程净水工程 输配水工程 穿孔旋流絮凝池 斜管沉淀池 重力式无阀滤池英文摘要AbstractIn order to solve the problem of unsafe drinking water in rural areas of Pengzhou hilly region,a centralized water supply project was designed in Tongji Town Hongshan Village.This project was designedto help 23,377 people drink clean water with the total volume of 4 thousand cubic meters.The whole project consists of three parts which is water diversion project,water treatmentproject and waterdistribution project.The water diversion project consists of the selection of water source location, the form of water diversion and the design of pump station.And infiltration drainagewas selected to get water in this project.This paper also demonstrates the detail process of design for each construction or apparatus in the water treatment plant. And the water power balance of gang of wells system was completely caculated which help make this paper more accurate.The water allocation and clarification projects are the major parts in this paper. The former contains the arrangement of pipelines, the determination of pipe caliber as well as pump lifts.But in this project,there is no need to use pump to lift water because gravity water supply is available which is more economic.The latter is water treatment plant design.And according to the survey about quality of ground raw water,it can be transmitted to the user only through simple disinfection (add chlorine dioxide).After programmeswere compared both technologically and economically,this process was selected which is as follows:raw water→pipe-shaped→perforation cycloneflocculation tank→