XXX工业区给水工程设计毕业论文推荐.docxVIP

摘要在经济与高科技高速发展的今天，水处理行业也飞速发展，虽然给水处理技术日新月异，但是传统的给水处理技术仍然在给水行业起重要的作用。本设计的主要任务是为杭州市萧山工业区进行给水工程初步设计，取水水源地是清水河，设计人口数为26万人，设计年限按10年考虑。经过对清水河水质进行综合分析、多种净水工艺方案比较、净水工程经济分析最终确定该工程的设计方案：取水工程采用合建式岸边取水工程；净水工艺采用传统的处理工艺（混凝—沉淀—过滤—消毒—清水池—二级泵站—市政管网）；管网为环状网布置形式。最后通过技术经济分析和制水成本分析，确定了该工程的单位制水成本为0.58元/m3。关键词：取水工程；净水工艺；管网布置；制水成本AbstractWith the rapid development of the economy and todays high-tech water treatment,water treatment industry is also developing rapidly, although water treatment technology becomes ever-changing, but the traditional water treatment technology still plays an important role in the water supply industry.The main task of the design is carried out for the preliminary design of Hangzhou Xiaoshan industrial area water supply project, the water sources is Qingshui River, the design population of 26 million people, consider the design life of 10 years. Through a a comprehensive analysis of the water quality of the river，a variety of water purification process scheme comparison and water purification project economic analysis ，we determine the final design of the project: intake project use in building engineering formula; water purification process using conventional treatment technology (coagulation — sedimentation —filtration — disinfection — clean water tank—secondary pumping station — municipal network); pipe arranged in the form of a ring network.Finally,we make the technical - economic analysis and water cost analysis and determine the cost of water is 0.58 yuan / m3.Keywords:Intake Project; Water purification process; Water distribution arrangement；The cost of water目录摘要IAbstractII目录III1前言- 1 -1.1设计概述- 1 -1.2设计内容- 1 -1.3设计资料- 2 -1.3.1城市总体布置图- 2 -1.3.2用水资料- 2 -1.3.3地形地貌- 3 -1.3.4工程地质及水文资源- 3 -1.3.5气象- 4 -1.3.6河流水文及水质资料- 4 -1.3.7其它资料- 4 -2水量计算- 6 -2.1居民最高日生活用水量Q1- 6 -2.2工业企业生活用水和淋浴用水Q2- 6 -2.3工业企业生活用水Q3- 6 -2.4浇洒道路及绿化用水Q4- 6 -2.5消防用水量Q5- 7 -2.6设计年限内城市最高日用水量- 7 -2.7最高日最高时设计水量Qh- 7 -2.8最高日平均时流量Qh’- 7 -3管网水力计算- 8 -3.1管网定线- 8 -3.2比流量计算- 9 -3.3沿线流量计算- 9 -3.4管网平差- 10 -3.4.