液化石油气储罐设计毕业设计推荐.docVIP

80m3液化石油气储罐设计 摘 要 本文首先介绍了储罐在国内外研究现状和发展趋势，对液化石油气储罐作了简单的介绍。接着对液化石油气储罐的进行了详细的结构设计， 80m3 liquefied petroleum gas storage tank design Abstract This paper firstly introduces the research status and development trend of tanks at home and abroad, and liquefied petroleum gas tanks are briefly introduced here. Then the liquefied petroleum gas storage tank structure design were studied in detail, and the use of Auto CAD software to draw the tank assembly drawing. This article is about the design of 80m3 of liquefied petroleum gas tank , several key technology in spherical tank manufacturing are: material, structure design, reinforcement calculation and strength check of the line design. The main contents of this paper include: design process design including the design pressure, design temperature, design reserves; structure design including the tube body and head, nozzles and nozzle flange design, manhole, mirror, level gauge, pressure gauge, thermometer, and safety valve structure, structure design, support structure design, welding joint design; opening reinforcement calculation; strength calculation and check. Keywords: tank; process design; structure; strength; reinforcement 目录 引 言 - 1 - 第1章 绪论 - 2 - 1.1 卧室储罐的介绍 - 2 - 1.2 液化石油气贮罐的分类 - 2 - 1.3 液化石油气特点 - 2 - 1.4 卧式液化石油气贮罐设计的特点 - 2 - 第2章 液化石油气的工艺设计及主体材料的选择 - 3 - 2.1 设计温度 - 3 - 2.2 设计压力 - 3 - 2.3 设计储量 - 3 - 2.4 焊接接头系数 - 3 - 2.5 主体材料的选择 - 3 - 第3章 液化石油气结构设计 - 4 - 3.1 筒体和封头的设计 - 4 - 3.2 计算压力 - 4 - 3.3 圆筒厚度的设计 - 5 - 3.4 椭圆封头厚度的设计 - 5 - 3.5 接管、法兰垫片和螺栓的选择 - 5 - 3.6 其他附件的设计 - 9 - 3.7 鞍座选型和结构设计 - 10 - 3.8 鞍座位置的确定 - 11 - 3.9 焊接结构设计 - 12 - 3.10 焊后处理 - 13 - 第4章 开孔补强设计 - 14 - 4.1 补强设计方法判别 - 14 - 4.2 有效补强范围 - 14 - 4.3 有效补强面积 - 15 - 4.4 接管区焊缝截面积(焊角取6.0mm） - 15 - 4.5补强面积 - 15 - 第5章 容器强度的校核 - 16 - 5.1 水压试验校核 - 16 - 5.2 筒体最小厚度校验 - 16 - 5.3 筒体轴向应力计算与校核 - 16 - 5.4 封头最小厚度校验 - 18 - 5.5 封头强度校核 - 18 - 5.6 筒体和封头切向应力校核 - 18 - 5.7 筒体环向应力的计算和校核 - 19 - 结论与展望 - 21 - 致 谢 - 22 - 参考文献 - 23 - 附录A：主要参考文献摘要及题录 - 2