毕业设计（论文）-函数发生器控制系统设计精选.doc

本科生毕业论文（设计） 题目： 函数发生器控制系统设计 学 院 电子信息工程学院 学科门类 工学 专 业 电子科学与技术 学 号 姓 名 指导教师 2015年5月18日 函数发生器控制系统设计 摘 要 DDS和DSP（数字信号处理）一样，是一项重要的数字化技术。直接数字式频率合成器（Direct Digital Synthesizer）的缩写是DDS。DDS技术是一种把一系列数字量形式的信号通过DAC转换成模拟量形式的信号的合成技术，它是将输出波形的一个完整的周期、幅度值都顺序地存放在波形存储器中，通过控制相位增量产生频率、相位可控制的波形。 与传统的频率合成器比较，DDS成本低、功耗低、分辨率高，时间转换快，并且广泛地应用于电信与电子仪器等领域，是完成设备全数字化的一个重要的技术。 基于直接数字频率合成原理（DDS)，本文的任务是设计一个信号发生器制芯片 关键词：函数信号发生器；DDS；LM1095R；CH452；控制系统 The design of control system ABSTRACT DDS and DSP (digital signal processing) is an important digital technology. The abbreviation for direct Digital Synthesizer DDS (Direct) is the. DDS technology is a kind of to a series of digital signal through the DAC is converted into analog signal synthesis technology, it is the output waveform of a complete cycle, amplitude values are sequentially stored in waveform memory, frequency is generated by controlling the phase increment and phase control of the waveform. With the traditional frequency synthesizer compared DDS has the advantages of low cost, low power, high resolution, fast switching time, and widely application in telecommunication and electronic equipment and other fields is complete equipment of digital a important technology. Based on the direct digital frequency synthesis (DDS) principle, the task of this paper is to design a function signal generator control system and consider the various factors, this paper chooses the graphics LM1095R display module and CH452 digital tube display driver and keyboard scan control chip and DDS chip to design it. In the design, through debugging, in the Quartus II software for waveform simulation, successfully debugged the keys of the keyboard and display the correct result, complete the design of the function generator control system, can satisfy the requirements of various functions and indicators, such