毕业设计（论文）-地基处理工程设计精选.doc

地基处理工程设计 摘 要 武钢冷轧厂技改工程(磨辊间内老磨床易位),由武汉钢铁研究院设计,因基坑开挖后基础范围深度内地基土承载力不能满足基础设计要求,因此需要进行地基处理. 根据对施工场地内基础下的地基土勘察报告有关地层状况分析,拟定以复合地基形式处理待加固地层，.考虑到整个施工场地空间狭小、施工面积有限等不利因素的制约,可供选择的施工方案有: 人工挖孔灌注桩、高压旋喷灌注桩 和CFG桩等。既而对三种方案分别进行有关技术参数设计、预算，并结合施工工艺、机具、材料来源、工期长短等多方面因素综合论证,最后选择CFG桩处理方案为本次设计最优方案.，并在此基础上提出了以静载荷试验作为复合地基施工质量检测方式的安全保证体系，以充分保证施工的可靠性。 关键词 人工挖孔灌注桩 高压旋喷灌注桩 CFG桩 Abstract stigmata procedure of construction and some one finally. Choose CFG pile as best one. form this base The topic of graduations project is the project of techno improvement of cold rolling factory in Wuhan steal and iron group, because of unsatisfied to the requirement of the capacity of bearing about depth of foundation pile. when it is excavated ,so need foundation treatment, which is designed by Wuhan iron and steal institute of design. According to the analyses of soil stratum under the foundation of construction the engineering geological report ,using compound foundation as a treatment .considering some disadvantage of the narrow of site. different construction methods is follows :the labor forced pile ,high jet pile ,CFG pile And compare with them form prey , drawing out a safe system of the method of Construction quality inspiration using test of platform bearing , to assure the construction’ reability. Keywords: the labor forced pile, high jet pile, CFG pile 目 录 第一部分 工程设计 工程概况 1.1场地工程地质条件…………………………………………………………………1.2场地水文地质条件 ……………………………………………………………… 1.3地基土物理力学性质指标………………………………………………………… 1.4地基土工程性能分析与评价……………………………………………………… 1.5基础地基处理方案的选择与评价………………………………………………… 方案论证 2.1 国内外概况……………………………………………………………………… 2.2 技术可行性……………………………………………………………………… 2.3 工程可靠性……………………………………………………………………… 2.4经济合理性……………………………………………………………………… CFG桩方案设计计算 承载力计算……………………………………………………………………… 沉降计算………………………………………………………………………… 材料用量计算…………………………………………………………………… 降水计算………………………………………………………………………… 施工 4.1施工准备…………………………………………………………………………… 4.2 CFG桩施工工艺………………………………………………………………… 4.3.CFG桩施工中常见的问题及质量控制措施…………………………………… 4.4施工检测验收…………………………………………………