[工学]钻镗组合机床毕业设计论文.doc

江苏科技大学 本 科 毕 业 设 计（论文） 学 院 机电与汽车工程学院 专 业 机械设计制造及其自动化 学生姓名 王伟平 班级学号 0845524233 指导教师 张春燕 二零一二年六月 江苏科技大学本科毕业论文 镗组合机床设计 The Design of Boring Combination Machine Tools 摘要 组合机床兼有低成本和高效率的优点，在大批、大量生产中得到广泛应用，并可用以组成自动生产线。随着自动化生产能力的提高，现代工厂中出现需要 Abstract The machinery Manufacture is an important pillar of economic development in a country. While the capability of production in trade of manufacture mostly depends on the advanced producing equipment－machine tool .modular machine tools have advantages of high efficiency and low cost. It is widely used in large batch production and can be consisted automatic production line With automatic production capability is improved, the modern factories in need of modular machine tool, the combination of more occasions based on general parts, match with workpiece specific shape and process design of special components and fixtures, composed of semi-automatic or automatic special machine. It usually adopts the multiaxial, knife, processes, and multi-faceted or multistage and processing, production efficiency than general machine high several times or more. Due to the common parts have standard series, can according to the combined flexible configuration, can shorten the cycle of design and manufacture. Therefore, the combination machine has the advantages of low cost and high efficiency, in large, mass production is widely used, and the automatic production line can be used to composition. This paper analyzes the manufacturing process detail of threading holes of a disc. The idea is once clamping the work. The accuracy can be satisfied the demand of drawing. According above idea, the boring combination machine tools has been designed. This paper presents the design and calculating of each part of this machine tool. Key words: modular machine tool；process picture sheet；fixture picturemachine contact size picture；multiple spin