EKKO软件菜单.docVIP

EKKO VIEW 1.File Menu Options 1.1??? Open Once the data have been successfully transferred from the DVL (or possibly a laptop computer if using a pulseEKKO system) to the PC where EKKO_View is installed, the process of loading data is a relatively straightforward one. Once the initial startup screen for EKKO_View has loaded, choose File – Open from the pulldown menu in the upper left corner of the EKKO_View window. This will bring up a dialog box that prompts the user to select a DT1 file. ? Figure 1: To open a GPR data file into EKKO_View, select File – Open from the pulldown menu. 1.2??? Plot Parameters The user has the ability to control many features of the data display, from the type of image, the axes labels, intervals, fonts, sizes and colours. Much of this information is contained in a plot preferences file. If the user creates a specifc combination of values that they find most useful for their typical data sets, they can save those values to a plot preferences file via the File - Save Plot Parameters option. If they then change any of the settings, they can return to their previously saved preferences file via the File -Load Plot Parameters option. If at any time, the user wishes to return to default settings, they can select File - Plot Parameters Factory Settings. ?? 1.3??? Save As Data images can be saved as JPEG (.JPG), bitmaps (.BMP) or windows enhanced meta-files (.EMF) via the Save option in the File menu pulldown. If the user wishes to switch the image format to save, they can do this via the Preferences Option in Section 1.5.? 1.3.1? Saving One Page Or Less If the horizontal scale is set to less than or equal to a single page, a standard dialog box will appear prompting the user to type in a name for the file to be saved. The file will be saved in the location specified by the user. 1.3.2? Saving Multiple Pages If the horizontal scale is set such that image spans multiple pages (for further details, see Section 4.1 Using The