复合材料热压炉成型钢板焊接模具制程设计之研究AStudyofthe.PDFVIP

料爐 Abstract The forming processes of the airframe structure composite parts include application of A Study of the Manufacturing heat and pressure. Autoclave forming is the most Processes Design of Welded Mold popular used method of applying heat and pressure simultaneously. Considering the dimensional for Autoclave Forming of accuracy and stability of mass production, the Composite Materials metallic molds should be the best choice among the different types autoclave forming molds. At present, the metallic mold is usually fabricated by 林* ** *** welding processes called welded mold. The Bor-Tsuen Lin* I-Hsien Tseng** Shing-Chung manufacture processes of its faces can be Chen*** summarized as: first, the mold face is decomposed into several parts, then, each part is formed and cut 立* ** by 1-inch thick steel plate, after that, all parts will be *** welded together to form a raw face, finally, the mold face is done after machined and polished. Nowadays, the molds is made by foreign manufacturers, the numbers and shapes of parts is 料 decide by experienced technicians, handwork and 爐