新款电机工艺流程.docVIP

新款电机工艺流程： Process1: Winding 工序1：繞線 Process 2: Soldering and testing 工序2：焊錫+檢測 Process 3: Assembly coil and stator 工序3：裝配線圈和定子 Process 4: Assembly PCB and stator Coils 工序4：裝配PCB板和線圈（PIN） Process 5: Solder the PCB 工序5：焊接PCB 板 Solution1: 方案一： The equipment is to finish process 1 and process 2 設備須完成工序1和工序2 Solution 2 方案二： Besides the processes in solution 1, the equipment is to finish process 3, process4 and process 5. 設備須完成以上全部工序。 + + = 工序1 工序2 =