温度传感器ds18b20在Zigbee芯片CC2430中的应用.docVIP

温度传感器ds18b20 在Zigbee芯片CC2430中的应用 以下资料是参考ds18b20的pdf资料、网上一些驱动例子、Zigbee硬件宏定义、并结合我之前实习期间的知识整理的，希望对有需要的同学有帮助ds18b20 H文件： /***************************************************************** Name: DS_18B20_Head.h?????????????????????????????????????** csy?????????????????????????????????????????????????????????????????????? ??** Date: 2010\12\31????????????????????????????????????????????????? *****************************************************************/#ifndef DS_18B20_Head_H#define DS_18B20_Head_H #include ioCC2430.h //ds18b20 pin#define DQ??? P1_4 //ds18b20 delay parmater:#define Delay_600us? 600#define Delay_60us??? 60#define Delay_40us??? 40#define Delay_30us??? 30#define Delay_5us????? 5#define Delay_3us????? 3#define Delay_1us????? 1 //command to ds18b20#define Command_Skip_Rom????????? ?? 0XCC??? // Skip ROM#define Command_Read_Register?????? 0XBE??? // Read Scratch Pad#define Command_Start_Conversion??? 0X44??? // Start Conversion void ds18b20_delay(unsigned int useconds);unsigned char ds18b20_reset(void);unsigned char ds18b20_read_byte(void);void ds18b20_write_byte(unsigned char val);unsigned int ds18b20_Read_Temperature(void); //CC2430 IO 宏定义 copy from hal.h// Example usage://?? IO_DIR_PORT_PIN(0, 3, IO_IN);??? // Set P0_3 to input//?? IO_DIR_PORT_PIN(2, 1, IO_OUT);?? // Set P2_1 to output #define IO_DIR_PORT_PIN(port, pin, dir)? \?? do {????????????????????????????????? \????? if (dir == IO_OUT)???????????????? \???????? P##port##DIR |= (0x01(pin));? \????? else?????????????????????????????? \???????? P##port##DIR = ~(0x01(pin)); \?? }while(0) // Where port={0,1,2}, pin={0,..,7} and dir is one of:#define IO_IN?? 0#define IO_OUT? 1 #endif /////////////////////////////////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////////////////// ds18b20 C文件 /***************************************************************** Name: DS_18B20.?????????????????