Router基本配置.docVIP

Router基本配置 实验目的： 学会cisco路由器命令行帮助 配置路由器基本参数 实验拓扑图： 实验步骤： 新路由器，无启动文件的路由器，配置寄存器值设置为0x2142的路由器启动时，会进入到系统初始化配置界面 --- System Configuration Dialog --- % Please answer yes or no. Would you like to enter the initial configuration dialog? [yes/no]:no 输入 “no”，并回车进入路由器CLI界面 Router? Exec commands: access-enable Create a temporary Access-List entry access-profile Apply user-profile to interface clear Reset functions connect Open a terminal connection crypto Encryption related commands. disable Turn off privileged commands disconnect Disconnect an existing network connection emm Run a configured Menu System enable Turn on privileged commands ethernet Ethernet parameters exit Exit from the EXEC help Description of the interactive help system lock Lock the terminal login Log in as a particular user logout Exit from the EXEC mrinfo Request neighbor and version information from a multicast router mstat Show statistics after multiple multicast traceroutes mtrace Trace reverse multicast path from destination to source name-connection Name an existing network connection pad Open a X.29 PAD connection ping Send echo messages ppp Start IETF Point-to-Point Protocol (PPP) radius radius exec commands release Release a resource renew Renew a resource resume Resume an active network connection rlogin Open an rlogin connection set Set system parameter (not config) show Show running system information slip Start Serial-line IP (SLIP) ssh Open a secure shell client connection systat Display information about terminal lines tclquit Quit Tool Command Language shell tdm TD